if you are wondering how to clean fabric shoes white, Follow these steps to keep your white shoes sparkling.
how to clean fabric shoes white – step by step
Put 2 to 3 tablespoons of salt into the bucket or container. You may use either table salt or kosher salt, and neither will interfere with the cleaning procedure.
Fill your container with water and stir until the salt dissolves completely. Place your shoes in the bucket and let them soak for at least four hours, up to overnight, if possible.
Removing them from the solution, gently rub off any excess dirt from their surfaces with a damp rag before drying them off with a towel.
The first step to cleaning white shoes is removing dust and dirt.
Use a soft-bristled brush or vacuum cleaner with the shoe on to remove dirt from the shoe’s surface. If your shoes are machine washable, use this method instead of washing them manually. Just ensure you don’t get water between the soles of your shoes.
If you don’t have a brush or vacuum cleaner handy, use an old toothbrush or damp cloth instead.
Dilute bleach with water in a 1:9 ratio. For example, mix a 1/2 cup of bleach with 9 cups of water and pour it into a spray bottle. This will allow you to apply the bleach to the fabric but only leave behind enough residue that it’s not noticeable after rinsing.
Spray the diluted bleach onto the fabric shoe using your spray bottle and allow it to sit for about 15 minutes before washing off as usual in warm water.
This will help eliminate any dirt or dust that may dull the shoe’s appearance.
If you notice a stain on your white fabric shoes, use just a dab of mild detergent or dish soap on the cloth. The goal is to remove any greasy substances without getting them wet enough that they soak into the material and cause more damage.
Be careful not to get soap onto the insole if it’s made from a different material than your shoe. This could discolor it over time.
If any soap gets on either side, wipe it off right away with a damp cloth so that no residue remains behind after drying off entirely before continuing with the other steps below.
Create your shoe cleaner.
To do this, fill a spray bottle with one vinegar and two water. Spray the mixture onto your shoes, and let it sit for a few minutes (the longer you let it sit, the better). Then wipe off with a soft cloth or paper towel.
Repeat as needed until there are no stains left behind on your shoes!
To do this, use a damp cloth and brush to remove dirt or dust. If there are stains on the inside of your shoes, use a toothbrush to scrub them away.
Remove any lint using a lint roller. Lint can be very stubborn to remove, but you must do so if you want your shoes to look their best!
If the laces on your shoes are machine-washable, you can wash them in the washing machine with your other white laundry.
Remove the laces from their shoes before putting them into the wash, then dry them flat and away from direct heat (like an air conditioner vent).
If you have white sneakers, you must air-dry them. If left in the sun or in the dryer, they’ll fade and lose shape.
To air dry your sneakers:
- Do not let them dry in the sun. The UV rays from sunlight will damage and yellow your shoes over time, so avoid this at all costs.
- Stuff newspaper into the shoes to keep their shape if necessary. You can also buy shoe trees online or at a hardware store. These are designed to keep sneakers looking great after being worn during a run or workout.
I hope this guide has helped you learn how to clean white fabric shoes.
It can be frustrating when you wash your favorite pair of shoes, but you must do so if they look dingy or dirty.
Following these instructions every few weeks or so is one of the best ways to keep them clean, and remember not to wear them in rainy weather unless they have rubber soles.